JVC KW-Z1000W Instruction Manual page 77

Ñ
Zone Control
You can select different sources for front and
rear positions in the vehicle.
1
Touch [Dual Zone] on the FAD / BAL /
Zone screen.
■ [Source]
You can switch the current source.
2
Set each source as follows.
[Zone Select]
■
Touch [Single Zone] to turn off the dual
zone function.
[Front Source], [Rear Source]
■
Select an audio source for each.
Rear Source;
"AV-IN"/"iPod"/"USB"/"OFF"
[Rear VOL.]
■
Adjust the rear source volume.
NOTE
• When the rear source is switched, the audio
source that is output at the AV OUTPUT terminal
is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost (P.78)
– Equalizer Control/Sound Effect/Listening
Position (P.73, 78, 74)
– Speaker Setup (P.72)
– Fader for Controlling General Audio
– High-resolution Sound Source File Playback
• When the dual zone is selected and audio source
other than "OFF" is selected as Rear Source, the
speaker system cannot be switched.
• You cannot select AV-IN if the Video input
terminal is used for camera.
Rear Source
• You cannot select iPod if it is connected via
Bluetooth or Apple CarPlay is connected.
• If you select iPod as the Front Source, you cannot
select USB as the Rear Source.
• If you select USB as the Front Source, you cannot
select iPod as the Rear Source.
• If you select HDMI as the Front Source, files with
sampling rates higher than 96 kHz in USB selected
as the Rear Source are skipped.
• If you select Bluetooth audio, HD Radio, Wireless
Mirroring, Apple CarPlay or Android Auto as the
Front Source, you cannot select USB or iPod as
the Rear Source.
Controlling Audio
77
English