Table of Contents
Advertisement
BACKSIDE CONNECTIONS
1. Input Connector Wall
Recessed wiring location for all cables. Place the plug from the supplied table-
top power supply into the DC 12V connector. Input at the monitor is 12 volts DC
from the TT universal AC supply (100-240 VAC, see specifications table for
AC/DC details).
2. Input Video BNC (and Y/C)and P.C Connectors
Attach the video cord from a camera, VCR, or other source here. Either left or
right, BNC or Y/C socket, can be input or output. Auto-termination switches
inside. See Connections, below.
3. Speakers
Audio inputs are high impedance. RCA jack connections are left (white) and
right (red). Inserting only a single plug will make a connection to both speakers
(dual monaural).
4. Mounting Keyholes
You may hang monitors on a screw head or nail head to a wall. Do not insert the
heads deeper than 1" (25mm).
5. Threaded Mounting Socket
The threaded sockets are hardpoints for mounting the monitor. You may mount it
in any orientation. The screws must not insert deeper than
The threads are 10-32 UNC.
2
DC12 V
-
+
AUDIO
VIDEO
S-VID EO
Typical Color LCD Video Monitor Back
- 14 -
4
5
1
3
PC
" (6 mm).
Advertisement
Table of Contents
