American Dynamics Intellex Intellex DVMS Installation And Configuration Manual page 28

Configuring the Intellex
2 Configure to PAL or NTSC settings:
If default setting is NTSC, to change to PAL:
a At the desktop, double-click the PAL icon.
b Click Yes to add the information in PAL.reg to the registry.
c Click OK.
If default setting is PAL, to change to NTSC:
a At the desktop, click NTSC.reg icon.
b Click Yes to add the information in NTSC.reg to the registry.
c Click OK.
3 Configure the mouse for right- or left-handed operation:
a From the Control Panel, double-click Mouse. The Buttons Tab of the Mouse Properties
appears.
b In Button Configuration select the Switch primary and secondary buttons check box.
c Click Apply then OK.
4 Configure the time zone:
a From the Control Panel, double-click Date/Time.
b From the Time Zone tab, select your time zone.
c Select the check box to automatically adjust the clock for daylight saving time.
d Click OK.
5 Add a printer:
a From the Control Panel, double-click Printers and Faxes.
b Double-click Add a Printer to launch the Add Printer Wizard.
c Follow the prompts.
d Click OK.
6 Change the default printer:
a From the Control Panel, double-click Printers and Faxes.
b Choose the default printer then select File > Set as Default Printer.
18 Intellex® Ultra