Grandstream Networks GXP 1625 Quick Reference Manual page 6

Call Parking allows you to park a caller so that another extension can retrieve the caller held in the parking lot. This
ability is a form of putting a call on hold so that the intended party can retrieve the call from elsewhere. Your phone
system is configured with 8 parking lots numbered 71 through 78. This short guide will assist users in navigating the
features and menus of the system.
A. PARKING A CALL USING AUTO-LOT ASSIGNMENT
3. To park a call on the next available slot, press the TRANSFER key on your screen or the physical transfer
key on your phone
4. Dial *2 + 70. The attendant will then read back to you the lot# the call has been parked to (for example, 71).
The call will then leave your phone
B. PARKING A CALL USING MANUAL ASSIGNMENT
5. To park a call on any available slot, press the TRANSFER key on your screen or the physical transfer key
on your phone
6. Dial *2 + 7x (x being the number lot you choose, for example 75). The call will then leave your phone
C. PARKING A CALL USING SPEED DIAL KEYS
If your phone is equipped with speed dial keys your options are:
1. Use the auto attendent as in section 1 above or;
2. Press the transfer key on your screen or the physical transfer key on the dialpad and then press any of the
available (unlit) park speed dial keys (which are labelled 71 through 78)
D. RETRIEVING A PARKED CALL
To pick up a call that has been parked:
Using speed dial key on equipped phones:
1.
corresponding Speed dial key on your phone to take the call (i.e. Park 71 or 71)
Or (for phones not equipped with speed dial keys)
Using the dial pad:
2.
P
ENNSYLVANIA
Call Parking System
If your call is parked on extension 71, pick up the Handset and dial 71.
T C
ELEPHONE
Pick up the handset, or to pick up using speakerphone, just press the
OMPANY
Questions?
Call (215) 634-2997 or email
support@richmondcomputer.com
6 | P a g e