Linksys WRT1900ACS Frequently Asked Questions Manual page 3

Linksys Official Support - Linksys WRT1900ACS Frequently Asked Que...
WIRELESS CONNECTION & SECURITY
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
ADVANCED CONFIGURATION
1.
2.
3.
4.
5.
6.
7.
TROUBLESHOOTING
1.
2.
3 of 13
What wireless security modes does the Linksys WRT1900ACS support?
Which wireless connection standards and frequencies are supported by the Linksys
WRT1900ACS?
Does the Linksys WRT1900ACS support the 80 MHz channel width on the 5 GHz
frequency?
How do I connect a wireless device to the wireless network of the Linksys
WRT1900ACS?
Where can I see the default wireless network name (SSID) and passphrase of the
Linksys WRT1900ACS?
Can I change the default wireless settings during setup?
Does the Linksys WRT1900ACS support simultaneous dual-band (2.4 GHz and 5 GHz)
connection?
What is the 802.11ac standard and what is its speed?
Which wireless band should be used to achieve a speed of up to 1300 Mbps?
How many Guest networks can I set up on my Linksys WRT1900ACS?
What is a media server and how does it work?
Can I connect a USB hub to the USB port of the Linksys WRT1900ACS to use multiple
devices?
Does the Linksys WRT1900ACS allow VPN tunnels using IPSec, L2TP or PPTP
protocols as pass-through?
Does the Linksys WRT1900ACS support SPI firewall?
Does the Linksys WRT1900ACS offer a Filter IDENT that block specific Internet data
types?
What is Demilitarized Zone (DMZ) and what is it used for?
What Dynamic Domain System (DDNS) providers does the Linksys WRT1900ACS
support?
How can I reset the Linksys WRT1900ACS to factory defaults?
I have reset the Linksys WRT1900ACS and now I can't launch the setup page. What do
I do?
https://www.linksys.com/us/support-article?articleNum=178015
7/8/2019, 10:19 AM