Epson Home Cinema 2200 User Manual page 65

You see a screen like this:
2. Press the up or down arrow button to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select Reset.
7. When you finish changing settings on a menu, press the
8. Press the Menu button to exit the menu or the
Parent topic: Adjusting the Menu Settings
Esc button.
Esc button to return to the previous screen.
65