Table of Contents
Advertisement
Parent topic:
Related references
Projector Light Status
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Setup Settings - Extended Menu
Related tasks
Opening the Lens Cover
Shutting Off the Picture and Sound Temporarily
Solutions When "No Signal" Message Appears
If the "No Signal" message appears, try the following solutions:
• Press the
through the available sources. Wait a few seconds for an image to appear on each source you cycle
through.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• Try a different video cable.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic:
Related concepts
Projector Connections
Displaying From a PC Laptop
If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to
display on an external monitor.
Solving Image or Sound Problems
Source button on the projector's control panel or remote control repeatedly to cycle
Solving Image or Sound Problems
102
Hide quick links:
Advertisement
Table of Contents
