Control Panel And Features - Amana NTW4500 User Instructions

CONTROL PANEL AND FEATURES

1
1 Load Size Control
Use this option to adjust the amount of water used with
your load size. Use enough water to allow the load to
move freely.
2
Wash Temperature Control
Wash Temperature Control senses and maintains uniform
water temperatures by regulating incoming hot and cold
water.
Warm and hot water will be cooler than what your
■
previous washer provided.
Even in Cool wash, some warm water is let into washer
■
to maintain a consistent minimum temperature.
Select a wash temperature based on the type of fabric and
soils being washed. For best results, follow the garment
label instructions, using the warmest wash water safe for
your fabric. See the Wash Temperature Chart.
NOTE: In wash water temperatures colder than 60° F
(15.6° C), detergents do not dissolve well and soils can
be difficult to remove.
3
Extra Rinse
If you desire an extra rinse at the end of your regular cycle,
turn the Extra Rinse knob to ON.
On models without the Extra Rinse knob, choose a second
rinse by pushing the Cycle Control knob in and rotating it to
any of the "Rinse" cycle settings.
4
Cycle Control knob
Select the wash cycle best suited for your type of fabric.
See the "Cycle Guide" for more details.
2 3
Not all features and options are available on all models. Appearance may vary.
Wash Temperature
Hot
Some cold water is added to
save energy. This will be cooler
than your hot water heater setting.
Warm
Some cold water will be added,
so this will be cooler than what
your previous washer provided.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
This is the temperature from
your faucet.
4
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Dark colors that bleed
or fade
Light soils
3