Table of Contents
Advertisement
24.7 Installing the appliance
Slide the appliance all the way in and centre it.
1.
Screw the appliance into place.
2.
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
24.8 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the securing screws.
2.
Lift the appliance slightly and pull it out completely.
3.
Installation instructions en
33
Advertisement
Table of Contents
