Tenda AC11 User Manual page 99

Parameter Description
Start ID The configuration is required when the IPv6 DHCP type is set to Manual.
It specifies the range of the last segment of the IPv6 address that the DHCPv6 server assigns
End ID
to the devices. Range: 1 to ffff.
It specifies the LAN IPv6 DNS configuration method.
IPv6 DNS Auto: Obtain the IPv6 DNS address from the upstream device.
⚫
Manual: Configure the IPv6 DNS address manually.
⚫
Primary It specifies the fixed IPv6 DNS address provided by your ISP here.
IPv6 DNS
Secondary
If your ISP only provides one DNS server address, you can leave the Secondary IPv6 DNS
IPv6 DNS
blank.
91