How To Print By Connecting Your Neo To A Usb Printer; How To Send Text To A Printer Using Ir Beaming; How To Print Wirelessly Using Neo 2'S Rf Capability - Alphasmart NEO 1 User Manual

How t o Pri nt by Connecti ng your NEO t o a USB Printer
How t o Send Text to a Pri nter Using IR Beaming
How t o Print Wirelessly Using NEO 2's RF Capability
Important notes for
printing wirelessly:
•
The Renaissance
Wireless Receiver Utility must
be running before you can
print wirelessly.
•
It's important to use the
Server Settings to give your
network a unique name so
you can find it easily. See
page 21 for instructions.
NEO 1 and NEO 2
User Manual
1. Plug one end of the printer's USB cable into NEO's USB printer port
2. Make sure the other end of the USB cable is plugged into the printer, and
make sure the printer is on.
3. Make sure NEO is turned on, and open the file you want to print.
4. Press print on NEO to print the current file.
Note: NEO doesn't control print settings such as font, print quality, margins,
and so on. These settings are determined by the printer's default settings.
1. Make sure your NEO is turned on, and open the file you want to print.
2. Point your NEO's IR port
3. Press print on the NEO.
To print wirelessly with NEO 2, you must have a Renaissance Receiver
connected to your computer. (See page 21 to set up the Receiver.) The NEO 2
file will print to your computer's default printer.
1. Make sure your NEO 2 is turned on, and open the file you want to print.
2. Press print on the NEO 2.
3. NEO 2 will look for a cable connection first, then for an IR connection. If
neither is found, NEO 2 will search for networks (that is, computers
connected to Renaissance Receivers).
When it lists those networks, use the arrow keys to highlight the Receiver
name you want; then, press enter. NEO 2 will connect to the computer
that has that Receiver, and it will print to the computer's default printer.
G
E T T I N G
A
A at the printer's IR transceiver.
A
S
T A R T E D
Printing from NEO
A .
15