How To Change System Settings Using Alphasmart Manager - Alphasmart NEO 1 User Manual

W A
O R K I N G W I T H
Defining System Settings for the NEO
How t o Change System Set tings Using AlphaSmart Manager
108
S M
L P H A M A R T A N A G E R
1. In AlphaSmart Manager, click the Settings tab.
2. Click System in the Settings List
A
3. Check the settings you want to change
to view all the settings.) Then, make changes to the settings as needed.
Note: When you change settings, notice that AlphaSmart Manager
automatically checks the System box on the left
check mark from this box, changes you make to settings won't be sent to
your NEO.
4. Click the Send List tab and verify that the settings you want to send
appear in the Send List Display.
5. If you have a SmartOption Mobile Lab and you want to send the changes
to some, but not all, of the NEOs, click Select Devices, check the
numbers to which you want to send the text, then click OK. (To send to all
connected NEOs, skip this step.)
6. Click Send. If you have set a send list password (see page 116), you must
enter the password and click OK.
A .
B
B . (You might need to scroll down
. If you remove the
A
NEO 1 and NEO 2
User Manual