How Alphasmart Manager Shows That Neos Are Connected - Alphasmart NEO 2 User Manual

G S
E T T I N G T A R T E D
Connecting NEOs to Your Computer
How AlphaSmart Manager Shows t hat NEOs Are Connected
6
2. A message may appear, saying that the driver is not certified for Windows
XP. This is expected. Click Continue Anyway.
3. Click Finish. If a message asks if you want to restart the computer, click
Yes or No.
4. In AlphaSmart Manager, check the connection status area at the bottom
of the window to make sure your NEO, or your AlphaHub and NEOs, are
connected.
If your NEOs don't appear to be connected in AlphaSmart Manager even
though you know you connected them properly, it could be because you
cancelled the Hardware Wizard or because the drivers weren't installed
properly. (Note: If the drivers weren't installed properly, it may be because
you don't have sufficient privileges/permissions on the computer.) To fix this
problem, disconnect the USB cable from your computer. Make sure
AlphaSmart Manager is running; then, reconnect the cable to a different USB
port. The Hardware Wizard should reappear. Follow the steps above again
and recheck the connection status.
The bottom of the AlphaSmart Manager window shows you how many NEO 1
or NEO 2 laptops (AlphaSmart Devices) are connected
below, just one NEO is connected via a USB cable, but you may have several
connected in a SmartOption Mobile Lab.
To view the status of the connection for each NEO, click the plus sign
(Windows) or (Macintosh) at the bottom of the screen
to wait a few moments before the connection status information appears.
B
A . In the example
B . You might need
A
AlphaSmart Manager 2 User Manual