Connecting Neos To Your Computer; Connecting One Neo To Your Computer; Connecting A Smartoption Mobile Lab To Your Computer; Connecting To A Windows Xp Computer For The First Time - Alphasmart NEO 2 User Manual

C o n n e c t i n g N E O s t o Y o u r C o m p u t e r

Connecting One NEO to Your Computer

Connecting a SmartOption Mobile Lab to Your Comput er
Connecting to a Windows XP Computer f or the First Time
AlphaSmart Manager 2 User Manual
After you have installed AlphaSmart Manager, you can follow these
instructions to connect your NEO or SmartOption Mobile Lab to your
computer.
1. Start AlphaSmart Manager (see page 4).
2. Use the USB cable that came with the
NEO to connect it to your computer.
Connect the end of the cable that is
nearly square A to the NEO
connect the other of the cable to a
USB port on your computer
1. Start AlphaSmart Manager (see page 4).
2. You'll find a cable labeled "Computer" coming out of the cart. This cable
has a USB connector that you can connect to your computer. Within the
cart, each NEO 1 or NEO 2 laptop is connected to the cart with its own
cable. (For more about setting up a SmartOption Mobile Lab, refer to the
instructions that came with it.)
If your computer has Windows XP, you will see a Microsoft Hardware Wizard
the first time you connect your NEO or SmartOption Mobile Lab to your
computer. Follow these steps when the wizard starts:
1. A Found New Hardware message appears in the lower-right corner of the
window; then, the Hardware Wizard starts. Accept the default option to
install the software automatically; then, click Next >.
G
E T T I N G

Connecting NEOs to Your Computer

B , and
C .
C
B
S
T A R T E D
A
5