Reset All (Factory Default) Menu; Kelvin In Color Temperature - Epson EB-G7905U Firmware Update Information

Details of Updated Projector Menus (Version 2.10)
Previous Settings Menu (Version 1.00)
Top menu Sub menu
Settings Geometry
Correction
New Settings Menu (Version 2.10)
Top menu Sub menu
Settings Geometry
Correction
To project onto a curved surface while maintaining the aspect ratio, set
Maintain Aspect Ratio to On.

Reset All (Factory Default) Menu

The Reset All (Factory Default) menu is added to the Reset menu.
Previous Reset Menu (Version 1.00)
Top menu Sub menu
Reset Reset Lamp Hours
Items or setting
values
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
Items or setting
values
Curved Surface Correct Shape
Horizontal
Linearity
Vertical Linearity
Maintain Aspect
Ratio
Items or setting values
Top menu Sub menu
Reset All Memories
Reset All Config
New Reset Menu (Version 2.10)
Top menu Sub menu
Reset Reset Lamp Hours
Reset All Memories
Reset All Config
Reset All (Factory Default)
You can use the Reset All (Factory Default) menu to reset all projector's
settings.
However, Date & Time, Lamp Hours, Password Protection items and their
passwords are not reset.
You need to enter a password to perform a reset. The default password is set
to "0000". Change this to your own desired password.

Kelvin in Color Temperature

The color temperature is specified with Kelvin in all color modes.
16
Items or setting values
Items or setting values