Reset All (User Default) And User Default Setting - Epson EB-L30002U Manual

Details of Updated Projector Menus (Version 4.10)
Web API
Set to On to enable to the Web API function.
Authentication
You can set the security for your projector to use during Web API
communications.
• Open
Security is not set.
• Digest
Communication is performed using API authentication (Digest
authentication).
See the Web API Specifications for Projectors for details.
a
PJLink
Set to On to monitor the projector using PJLink.

Reset All (User Default) and User Default Setting

The Reset All (User Default) setting and the setting for the User Default
Setting are added to the Reset menu > Reset All (Factory Default).
Previous Reset Menu (Version 4.00)
Top menu Sub menu
Reset Reset All (Factory Default) Reset All (Factory Default)
New Reset Menu (Version 4.10)
Top menu Sub menu
Reset Reset All (Factory Default) Reset All (User Default)
Items or setting values
Items or setting values
Reset All (Factory Default)
User Default Setting
Reset All (User Default)
You can apply the values you set in the User Default Setting menu.
User Default Setting
You can define the default value used when performing the Reset All
(User Default) functions.
You can set the values for the following settings:
• Light Source Mode
• Brightness Level
• Constant Brightness
• A/V Output
• Standby Mode
• Standby Confirmation
• Messages
• Beep
• Sleep Mode
• Shutter Timer
• Shutter Release
• Color Mode
• Wireless Mode
• DHCP (in the Wired LAN menu)
• Command Communication
12