Printing Is Too Slow; Printer Doesn't Print - Epson Stylus Photo 875 DC Manual

Printing is too slow

Try one or more of these solutions:
❏ Make sure the Media Type setting in your printer driver is
correct. For instructions, see "Making the Media Type setting"
on page 2-4 for Windows or "Making the Media Type setting"
on page 4-3 for Macintosh.
❏ Select Automatic as the Mode setting on your printer driver's
Main menu (Windows) or in the Print dialog box (Macintosh)
and then move the slider to Speed. For instructions, see
"Using the Automatic mode" on page 2-7 for Windows or
"Using the Automatic mode" on page 4-6 for Macintosh.
❏ Close any applications you are not using at the moment.
❏ If you upgraded from Windows 95 to Windows 98, uninstall
the printer software using Add/Remove Programs in the
Control Panel in Windows, then install the software again.

Printer Doesn't Print

If one of the following error indications is displayed, try the
solutions listed.
❏ All lights are off
❏ Lights came on and then went out
❏ Only the power light is on
❏ The S paper out light is flashing or on
❏ One of the ink out lights is flashing or on
❏ Ink out lights are on and the other lights are flashing
9-16
Troubleshooting