Setting The Time; Setting The Water Hardness - Miele G 7966 Operating Instructions Manual

Initial commissioning

Setting the time

The time is updated automatically if a
connection is established with the
WiFi network.
The display will then change to the
screen for setting the clock format and
the time of day.
The current time of day must be set
before you can use the timer option.
 Select the setting you want for the
clock format.
 Set the hours and the minutes and
confirm by pressing OK.
26

Setting the water hardness

The display changes to the screen for
setting the water hardness.
- You should program the dishwasher
to the correct water hardness for your
area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g., between 10–16 gr/gal (10–
15 °dH), always program the
dishwasher to the higher value (16 gr/
gal (15 °dH) in this example).
It is useful to know your water hardness
so that you can provide the service
technician with this information in the
event of any service calls.
Enter the water hardness below:
____________ gr/gal (°dH)
The dishwasher is programmed at the
factory for a water hardness level 1 gr/
gal (1 °dH).
 Set the water hardness level in your
area and confirm with OK.
See "Water hardness" under
"Settings" for more information.