Cleaning The Control Panel; Cleaning The Reflector Panel; Cleaning The Appliance Front - Miele G 7966 Operating Instructions Manual

Cleaning and care

Cleaning the control panel

 The control panel should only be
wiped with a damp cloth.

Cleaning the reflector panel

The reflector panel for the in-operation
indicator light is situated on the cover
sheeting underneath the countertop.
 The reflector panel should only be
cleaned with a damp cloth if
necessary.

Cleaning the appliance front


Damage due to soiling.
Soiling that is left too long might
become impossible to remove and
could cause the external surfaces to
alter or discolour.
Remove any soiling immediately.
 Clean the front with a clean sponge
and a solution of hot water and dish
soap. After cleaning, wipe the front
dry using a soft cloth.
A clean, damp microfibre cloth
without cleaning agent can also be
used for cleaning.
86
To avoid damage to the outer
surface, do not use:
- cleaning agents containing soda,
ammonia, acid or chloride
- cleaning agents containing lime scale
remover
- abrasive cleaning agents, such as
scouring powder, scouring liquid, or
pumice stones
- cleaning agents containing solvents
- stainless steel cleaning agents
- dishwasher cleaners
- oven cleaners
- glass cleaners
- hard, abrasive brushes or sponges,
e.g., pot scourers, brushes, or
sponges which have been previously
used with abrasive cleaning agents
- eraser sponges
- sharp metal scrapers
- steel wool
- steam cleaners