Table of Contents
Advertisement
2.
Remove the three Phillips M2.0 × 3.0 screws (2), and then remove the fan (3).
Reverse this procedure to install the fan assembly.
Heat sink
To remove the heat sink, use these procedures and illustrations.
Table 5-7
Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover
3.
Remove the battery (see
Remove the heat sink:
1.
In the order indicated on the heat sink, remove the four Phillips M2.0 × 2.0 screws (1), and then remove
the heat sink from the computer (2).
(Preparation for disassembly on page
(Bottom cover on page
Battery on page
26).
25).
Component replacement procedures
Spare part number
M00434-001
25).
33
Hide quick links:
Advertisement
Table of Contents
