Preface - Siemens SIMATIC 505 PPX:505–6108A User Manual

Manual Content This manual contains instructions for installing, wiring, and calibrating the
Analog Input Modules (PPX:505–6108A and PPX:505–6108B), and the
Analog Output Modules (PPX:505–6208A and PPX:505–6208B). The
modules operate with the Series 505
The manual does not give the details of analog-to-digital conversion
techniques. Familiarity with these techniques may be necessary in some
applications.
References Refer to the manuals listed below for instructions on installing,
programming, and troubleshooting your System 505 controller.
Agency Approvals Series 505 Analog Input and Analog Output Modules meet standards of the
following agencies:
Series 505 products have been developed with consideration of the draft
standard of the International Electrotechnical Commission Committee
proposed standard (IEC–65A/WG6) for programmable controllers (released
as IEC 1131–2, Programmable Controllers, Part 2: Equipment
Requirements and Tests, First Edition, 1992–09). Contact Siemens Energy
& Automation, Inc., for information about regulatory agency approvals that
have been obtained on Series 505 units.
Series 505 Analog I/O Modules User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SIMATIC 505 System Manual (PPX:505–8201–x)
SIMATIC 505 Programming Reference Manual (PPX:505–8204–x)
SIMATIC 505 Softshop
(PPX:SS505–8101–x)
SIMATIC 500 /505 TISOFT
(PPX:TS505–8101–x)
Underwriters Laboratories: UL Listed (Industrial Control Equipment)
Canadian Standards Association: CSA Certified (Process Control
Equipment)
Factory Mutual Approved; Class I, Div. 2 Hazardous Locations
CE Marking: Low Voltage Directive 73/23/EEC; Electromagnetic
Compatibility Directive 89/336/EEC
Verband Deutscher Elektrotechniker (VDE) 0160 Electrical Equipment
(Self-Compliance)
controller.
for Windows User Manual
Release 6.3 User Manual

Preface

Preface vii