Recommended Rack
Configurations
Figure 15: Flush Right-Angle Bracket (top)
Step 3 : Install the PDU into the rear of the rack.
a. Locate the top row of holes on the top vertical rail.
b. Secure the right-angle bracket on the top vertical rail with the provided bolts and nuts.
Before fully tightening the bolts, ensure that the plug side of the PDU is 145mm / 5.7in away
from the rear rack rail.
Figure 16: PDU Distance from Rack Rear Rail
c. Locate the bottom row of holes on the bottom vertical rail.
d. Secure the right-angle bracket on the top vertical rail with the provided bolts and nuts.
Before fully tightening the bolts, ensure that the plug side of the PDU is 145mm / 5.7in away
from the rear rack rail.
4.1 PDU Mounting Bracket Installation (KIT-MBVPT-1B)
4. Installation
24