Western Digital Ultrastar Data102 Configurations page 25

Recommended Rack
Configurations
Figure 7: Flat Bracket Installation (bottom)
d. Align the right-angle bracket behind the flat bracket over the holes on the left-hand side of
the flat bracket.
e. Slide the washers onto the mounting bolts and secure the right-angle bracket to the backer
plate through the flat bracket. Before fully tightening the bolts, ensure that the right-angle
bracket is flush with the edge of the PDU before tightening.
Figure 8: Right-Angle Bracket Installation (bottom)
4.1 PDU Mounting Bracket Installation (KIT-MBVPT-1B)
4. Installation
20