Parts And Controls - Aiwa XR-X7 Operating Instructions Manual

PARTS AND CONTROLS

Main unit: rear
2
1
4 5 6
1 DIGITAL OUT (OPTICAL) jack
CD digital sound signals can be output through this jack.
Use an optical cable to connect digital audio equipment.
Remove the dust cap from the DIGITAL OUT (OPTICAL)
jack. Then connect an optical cable plug to the DIGITAL
OUT (OPTICAL) jack.
2 AM LOOP and FM 75
terminals
Connect the supplied AM and FM antennas.
3 SPEAKERS3 terminals
Connect the supplied speakers using the supplied
speaker cords.
4 AC power cord
5 VIDEO/AUX IN jacks
Accept analog sound signals from external equipment.
3
Connect external equipment using an optional connecting
cable with RCA phono plugs (red plug to the R jack, white
plug to the L jack). Refer also to the operating instructions
for your equipment.
To switch function to external input, press VIDEO/AUX
(AUX on the remote control) to select the AUX (VIDEO or
TV) function.
Tip:
To change a source name in the display, hold down
7
VIDEO/AUX and press POWER while the power is on.
AUX VIDEO
6 LINE OUT jacks
Analog sound signals for all functions can be output
through these jacks. Use a cable with RCA phono plugs
to connect audio equipment.
Connect the red plug to the R jack, and the white plug to
the L jack.
Signals input through the VIDEO/AUX jacks are not
output from the LINE OUT jacks.
7 3SUPER WOOFER jack
Connect an optional powered sub woofer with a built-in
amplifier to this jack.
TV
En
5