Timer Operations - Aiwa NSX-TR99 Operating Instructions Manual

TIMER OPERATIONS

En
Sleep timer
Turns off the unit automatically after a specified time.
1 Press SHIFT+SLEEP on the remote control.
"SLP" appears on the display.
2 Press f or g repeatedly to set the sleep
timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 6 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
•MULTI JOG is also available in place of f or g.
Tip:
The display is dimmed while the sleep timer is active.
To check the remaining time until the unit turns off
Press SHIFT+SLEEP on the remote control. The remaining
time is displayed for 6 seconds.
To cancel the sleep timer
Press SHIFT+SLEEP twice on the remote control so that "SLP
OFF" is displayed.
18
Timer playback
Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.
1 On the remote control, press SHIFT+TIMER to
display " PLAY" and press ENTER.
If ENTER is not pressed within 6 seconds, you will exit
the timer setting mode and the previous setting, however,
is entered.
On the unit, press MODE repeatedly to display
"TIMER", and press ENTER within 4 seconds.
Then turn MULTI JOG within 6 seconds to select
" PLAY", and press ENTER twice within 4
seconds.
2 Press f or g to set the timer-on time, then
press ENTER or aSET.
3 Press f or g to select the source, then
press ENTER or aSET.
4 Press f or g to set the timer-activated
duration, then press ENTER or aSET.
With each press, the timer-activated duration changes in
5-minute steps between 5 to 240 minutes.
5 Press f or g to adjust the volume level
for timed playback, then press ENTER or aSET.
Adjustable range: 0 to 31
6 Prepare the source.
To play CD(s), load disc(s).
To play the radio, select the band and tune in to the desired
station.
To play a tape, insert the tape and select the deck.
To play external equipment connected to the VIDEO/AUX
jacks, set an external timer for the equipment so that its
playback begins at the same time.
7 Press POWER 6STANDBY/ON to turn the unit
off.
At timer-on time, the unit turns on and plays the selected
source. After the specified timer-activated duration, the
unit turns off again.
Tip:
The display is dimmed while the timer playback is active.
•To stop timer setting in step 2 to 5, press s.
Timer standby mode is also canceled.
•Timer playback will not begin unless the unit is turned off
first.
•Connected equipment cannot be turned on or off by the built-
in timer of this unit. Use an external timer.
•MULTI JOG is also available in place of f or g.
•In step 3, TAPE, TUNER, VIDEO/AUX, CD or FUNCTION is
also available to select the source.
In step 5, VOLUME +,- or VOLUME is also available to
adjust the volume level.