Table of Contents
Advertisement
TRENDnet User's Guide
4. Select the record type, and click‐and‐drag the mouse on the time bar to
set the record schedule.
5. Click Save to save the settings.
Capture
You can configure the scheduled snapshot and event‐triggered snapshot. The
captured picture can be stored in the local storage or network storage.
Steps:
1.
Enter the Capture Settings interface: Configuration > Storage > Storage
Settings > Capture.
2.
Go to Capture Schedule tab to configure the capture schedule by click‐
and‐drag the mouse on the time bar. You can copy the record schedule
to other days by clicking the green copy icon on the right of each time
© Copyright TRENDnet. All Rights Reserved.
3.
4.
5.
bar.
Click Advanced to select stream type.
Click Save to save the settings.
Go to Capture Parameters tab to configure the capture parameters.
(1) Check the Enable Timing Snapshot checkbox to enable continuous
snapshot.
(2) Select the picture format, resolution, quality and capture interval.
(3) Check the Enable Event‐triggered Snapshot checkbox to enable
event‐triggered snapshot.
(4) Select the picture format, resolution, quality, capture interval, and
capture number.
TV‐IP328PI
39
Advertisement
Table of Contents
