3. Installing the pop tray
(1) Tilt the product, and attach and slide the pop tray so that the four stoppers on the bottom fi t into the round
holes in the pop tray slide mechanism.
(2) Slide the pop tray in the direction of the arrow, and pull it out to the position to be used.
Do not use the pop tray so as to protrude from the surface where the product is installed. Doing so may
result in damage.
4. Inserting an SD/SDHC memory card
(1) Put your fi nger into the slot on the side and remove the side cover.
Side cover
– 6 –
V-R200 Installation Manual
Pop tray
Round holes
Fig. 7
Fig. 8
Slot
Fig. 9
Stopper