Cd Changer Play - Aiwa CT-X428 Operating Instructions Manual

Toswltctfmottos
CD CHANGER PLAY
You can play CDs with this unit by connecting the
optional AIWA ADC-M55, ADC-M35 compact
disc changer. Make sure that the disc magazine
loaded with the discs is inserted in the connected
compact disc changer.
To install the unit, refertotheseparate Installation
and Connections Manual.
2
I Press CD to start playing from disc 1.
The discand tracknumbersappear.
Disc number Track numbe!
z Adjust the volume with i-i-.
PWR
DISC
V/A
BAND
~ I INT I REP1 TAPE CD
W REP
Press following buttons to operate the connected
compact disc changer.
TO
do this Press this button
To pause
m
To turn off the unit, press PWR.
Even if the unit is in Radio or Tape Play mode,
pressing CD switches the unit to CD Changer
Play mode,
If you wish to switch to another mode, press the
following buttons.
- Pressing TAPE switches the unit to Tape
Play mode,
- Pressing BAND switches the unit to Radio
mode.
Toslrh tracks
Buttons ] Press' I Press and hold
m
I Skir.M
to the next I Advances
m
+
track rapidly
Releases to
resume play
Skips back to Reverses
the beginning of rapidly
the current track Releases to
resume ~lav
*Press for less than 0.5 second.
Toplayolhar disc
To start playing the previous disc in the disc
magazine, press DISC T.
To start playing
the next disc, press
DISC A. The number of the disc (1-6) appears.
Rapeat play
To repeat the current track,
press REP (the
"REPEAT" indication appears).
To repeat the current disc, press REP 1.
Todeactivateeither mode, pressthesame button
again.
Introplay
Press INT. (The "SCAN indicationappears.)
Thefirst10seconds
of each track on all the discs
in the disc magazine will be played in sequence.
To deactivate Intro play, press INT again.
Nota
By pressing one of the following buttons, you can
deactivate Repeat play and Intro play DISC Y,
DISC
A, M, t44,
INT, REP, REP 1, PWR.
To resume
H&Mv'/ 12