Table of Contents
Advertisement
Specifications
2.2.5
Contact Output Module
Item
Number of outputs
Isolation method
Rated load voltage
Rated switching current
Minimum switching load
Maximum switching voltage
Response time
Outputs per group
Life of the contacts
Maximum switching frequency
Surge suppressor
Fuse
Dielectric withstand voltage
Insulation resistance
Noise durability
Protection of degree
Indication of operating status
Number of occupied slices (Width)
Number of occupied
I/O points
Max. current consumption (24 V DC)
Internal power consumption
(5 V DC), all outputs ON
Weight
16
OFF
ON
ON
OFF
Mechanical
≥ 100000 times at the rated switching voltage/current load
≥ 100000 times at 200 V AC, 1,5 A; 240 V AC, 1 A (cosϕ = 0.7)
Elektrical
≥ 100000 times at 200 V AC, 1 A; 240 V AC, 0.5 A (cosϕ = 0.35)
≥ 100000 times at 24 V DC, 1 A; 100 V DC, 0.1 A (L/R = 7 ms)
2830 V AC rms for 3 cycles (operation altitude 2000 m)
Tested with noise simulator (Peak-to-peak noise voltage: 500 V,
noise width/noise frequency: 1 µs/25 to 60 Hz)
First transient noise compliant to IEC61000-4-4: 2 kV
With LEDs RUN, ERR and 1 LED for each output
Inputs
Outputs
ST1Y2-R2
2
Photocoupler
24 V DC/
240 V AC
At 24 V DC: 2 A (resitive load) per output
At 240 V AC: 2 A (cosϕ = 1) per output
4 A max. per group
5 V DC (1 mA)
125 V DC/264 V AC
≤ 10 ms
≤ 12 ms
2
≥ 20 million times
3600 times/hour
Not provided
Not provided
≥ 10 MΩ (across external terminals and FG,
checked with insulation resistance tester)
IP20
1 slot (12.6 mm)
2
2
35 mA (when both relays are switched on)
90 mA
0.04 kg
MITSUBISHI ELECTRIC
Advertisement
Table of Contents
