Table of Contents
Advertisement
2
Getting Started with the Logic Analyzer
To power off the system
You can power off the logic analyzer using Windows Shutdown or a short press
of the power button.
When powering off the logic analyzer, wait until the fans stop turning (about 15 seconds)
N O T E
before turning the logic analyzer back on. This ensures that internal circuitry restarts in a
known state.
Using the Windows Shutdown
On the logic analyzer desktop click Start>Shut Down or if you are running
remote desktop, click Start>Settings>Windows Security>Shut Down. This:
• Closes all programs that are running.
• Writes all data to the disk.
• Turns off the power supply.
• If the system is unplugged while it is off and then plugged back in, the
system will not power on until the power button is pressed.
Using a Short Press of the Power Button
Pressing the power button on the logic analyzer for a short time (less than 2
seconds):
• Closes all programs that are running.
• Writes all data to the disk.
• Turns off the power supply.
If the power button on the Remote Desktop is depressed for a short time (less
than 2 seconds or so), a message on the logic analyzer screen (not on the
remote desktop) will pop up asking if you really want to power down. Clicking
the 'yes' button results in the above events. Clicking 'no' will prevent the
shutdown. Not answering the dialog box (clicking neither "Yes" nor "No") will
have no effect. Further short presses on the power button will have no effect.
28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
16800 Series Portable Logic Analyzers Installation/Quick Start Guide
Hide quick links:
Advertisement
Table of Contents
