Connecting Router Wirelessly - Airlink101 AR430W Quick Installation Manual

Step 3 Click Apply and OK to save the setting.
Go to Status tab, Internet connection section to verify if you get the valid IP address
information. If you have trouble connecting to the Internet, please go through the
Troubleshooting section at the end of this installation guide.
Section 4
Connecting the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless
network card to the same settings in order to establish a wireless connection to the router.
Please refer to your wireless network card's manual on how to configure these settings.
SSID: default
Operating Mode: Infrastructure
Authentication: Open System
Channel #: 6
WEP: disabled
If you want to change the router's wireless settings, log in to the router and select the
Wireless tab. Be sure to click Apply and OK to save the setting.
For information on changing the router's log in password and enabling wireless encryption,
please refer to the User's Manual in the provided CD.