Dual Rgb Input Card - Barco Argus User Manual

3.2.10 10 Dual RGB Input Card

The D RGB I C
UAL NPUT ARD
1280×1024@75Hz or on 0×1024@75Hz or one analog signal with UXGA resolution or higher are digitized for further processing in
A .
RGUS
Standard
The synchronization modes Hsync+Vsync, Csync and Sync-on-Green are supported.
Connectors
The D RGB I C
UAL NPUT ARD
signal to the O B . If an UXGA signal is inserted it must be connected to
MNI US
able.
Order
Within a single D RGB I
UAL
order in that the input cards are inserted into one or more O
and 3.2.16 Arrangement of expansion
Specifications
For detailed technical specifications of the D
Barco – Argus Workstation for Windows – DOC-3266-2 – Revision 06 – April 2004
provides the capability of displaying RGB monitor signals. Either two analog signals up to
has two VGA compatible 15-pin SubMinD connectors. Each is for connecting one RGB
RGB In 1
RGB In 2
C the numbering of the video channels is as shown in the figure above. The
NPUT ARD
cards.
RGB I
UAL
d it must be connected to RGB In 1
B devices is given in section
MNI US
C please refer to section
NPUT ARD
_________________________________________________________________________
3. Getting started
B In 1, while RGB In 2 is not avail-
connector of D RGB I
UAL
3.2.15 Argus OmniBus
7.1 Technical data.
Figure 3-23
C
NPUT ARD
3-19