Dual Rgb Input Card - Barco EOS X Terminal User Manual

3.2.9 Dual RGB Input Card

The D RGB I C
UAL NPUT ARD
1280×1024@75Hz or one analog signal up to UXGA resolution or higher are digitized for further processing in E
Standard
The synchronization modes Hsync+Vsync, Csync and Sync-on-Green are supported.
Connectors
The D RGB I C
UAL NPUT ARD
signal to the O B . If an UXGA signal is inserted it must be connected to RGB In 1, while RGB In 2 is not avail-
MNI US
able.
Order
Within a single D RGB I
UAL
order of the D RGB I
UAL NPUT
C . Refer to section 3.2.7 Quad Analog Video
ARD
Specifications
For detailed technical specifications of the D
Barco – Eos X Terminal – DOC-3061-2 – user's manual – Revision 11 – November-2004
provides the capability of displaying RGB monitor signals. Either two analog signals up to
has two VGA compatible 15-pin SubMinD connectors. Each is for connecting one RGB
RGB In 1
RGB In 2
C the numbering of the video channels is as shown in the figure above. The
NPUT ARD
C in E is determined in exactly the same way as with the Q
ARDS OS
Card, please.
RGB I
UAL
C please refer to section
NPUT ARD
___________________________________________________________________
3. Getting started
Figure 3-30
connector of D RGB I
UAL NPUT
A V
UAD NALOG
7.1 Technical data.
.
OS
C
ARD
IDEO
3-23