Your Light Fixture - Encore sitdown User Manual

Your Light Fixture

To add your light fixture to your machine, first
loosen the nut and washer from the base of the
light fixture.
Slide the lamp base into the lamp holder on the
side of the machine.
Your light fixture came with a long cord. At this time
you can trim the cord so that it will reach the outlet
on top of the power box. This outlet is also where
you will find the plug for your lamp.
Open your plug by pulling on the silver tab and
open the plug. Trim the wires flush, with enough to
reach the outlet on the top of the power box. Lay
the wires in the space provided in the plug and
close the plug. Caution: Before you close, make
sure that you do not have any wires crossed, as this
will create a short.
Plug in and enjoy light as you quilt.
Updated January 2019 | 5