Table of Contents
Advertisement
Threading Overview
Please note: The takeup lever guard has been
removed for a clear view for pictures only.
Never run the machine without the guard in
place. Extreme head injury may occur.
How Do I Thread the Machine?
1. Place a cone of thread on the thread holder.
Figure 1
2. Pull thread through the eyelet above the cone of
thread. Make sure the eyelet is directly above the
thread cone.
Figure 1
3. Thread the upper thread guide as shown in
picture.
Figure 2
Figure 1
Figure 2
Updated January 2019 | 15
Advertisement
Table of Contents
