05201053
2413
Notice
Date
Operating inspection
Before putting the machine into service, carry out the working tests.
The operating inspection must be done by an approved technician.
Manual operation
The procedure for operating the various machine functions manually is described in the chapter
"Machine operation" under the heading "Manual operation".
• Switch on the machine's main switch and check the voltage on the three phases (3 x 400
volts).
• Check the direction of rotation of the cage
during spinning. The cage should rotate as
shown by the arrow on the hereby drawing.
Check this point especially if you have
changed the machine's motor or frequency
converter.
1
8
Page
8. Operating
inspection
Washer-extractor barrier types
Washer-extractor standard types
INSTALLATION
MANUAL
D1446
D1571