Chapter 4 Emc Countermeasure Parts; Noise Filter (For Controller Power Supply); Emc Filter (For Servo Amplifier Power Supply); Mr-J5 Series/Mr-J4 Series/Mr-Jn Series - Mitsubishi Electric MELSERVO EMC Installation Manuallines

4
EMC COUNTERMEASURE PARTS
For details of each part, contact the parts manufacturer.
4.1

Noise filter (for controller power supply)

For the noise filter installed to the controller, refer to the manual of the controller used.
4.2

EMC filter (for servo amplifier power supply)

MR-J3 series, MR-J3W series, and MR-J2-Super series are discontinued models.
• For the connection method of the EMC filter and servo amplifier, refer to the instruction manual and user's manual of each
servo amplifier.
• When connecting multiple servo amplifiers to one EMC filter, refer to the following.
Page 32 Connecting multiple servo amplifiers to one EMC filter
• Some EMC filters have a large leakage current.
• When selecting a molded-case circuit breaker, consider the increase in leakage current and select one that will not affect
the servo amplifier, converter unit, and drive unit.

MR-J5 series/MR-J4 series/MR-JN series

For the combination of the EMC filter with the servo amplifiers, converter units, and drive units, refer to the instruction manual
and user's manual of each product.

MR-J3 series/MR-J3W series/MR-J2-Super series

For the combination of the EMC filter with the servo amplifiers, converter units, and drive units, refer to the following.
Page 35 Combination with EMC filters
4 EMC COUNTERMEASURE PARTS
18
4.1 Noise filter (for controller power supply)