Appendix A Specifications - Siemens SIMATIC TI525 Hardware And Installation Manual

Environmental Specifications
(All P/C models and power supply)
Storage Temperature
–405 to 705C; –405 to 1585F
Operating Temperature
05 to 605C; 325 to 1405F
Relative Humidity
5% to 95% noncondensing
Vibration
Sinusoidal: IEC 68–2–6, Test Fc;
0.15 mm peak to peak, 10–57 Hz;
1.0 g, 57–150 Hz
Random: NAVMAT P–9492 or
Test Fdc with 0.04g 2 /Hz, 80–350 Hz, and
3dB/octave rolloff, 80–20 Hz and
350–2000 Hz at 10 min/axis
Impact Shock
IEC, 68–2–27, Test Ea; Half sine, 15g, 11 ms
Pollution degree
2, IEC664, 664A
Electric Noise Immunity
Conducted noise: IEC 801, Part 4, Level 3
MIL–STD–461B, Part 4;
IEC 255–4, Appendix E
EEC 4517/79 Com(78) 766 Final, Part 4
IEEE 472, 2.5 kV
Radiated noise: IEC 801 Part 3, Level 3
MIL–STD–461B, Part 4;
Electrostatic discharge:IEC 801, Part 2,
Level 4 (15 KV)
System Isolation
Isolation (user-side to PLC-side): 1500 Vrms
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
IEC 68–2–34,
CS01, CS02, CS06
RS01, RS02
A-1
APPENDIX A
SPECIFICATIONS
General Specifications
(All P/C models)
Input Power
Provided by power supply module
PPX:505–6660 for user-supplied 110/220 VAC.
PPX:505–6663 for user-supplied 24 VDC.
Maximum power drawn from base by TI525:
10 W @ +5 VDC, 0.5 W @ –5 VDC
Maximum power drawn from base by TI535:
12.5 W @ +5 VDC, 0.2 W @ –5 VDC
Battery Backup
3.0 V lithium battery (PPX:2587678–8005)
3 years typical storage (05 to 605C)
6 months typical storage (05 to 605C)
Communication Ports
RS-232-C/RS-423: all models
RS422: PPX:525–1208, PPX:525–1212
PPX:535–1204, PPX:535–1212
User Memory Capacity
2K, 4K, 8K, or 12K of RLL memory,
depending on the model.
Memory Backup
EEPROM (PPX:2587681–8020)
Battery backed-up static RAM
Corrosion Protection
All parts are of corrosion-resistant material
or are plated or painted as corrosion
protection.
Agency Approvals
(All PLC models and power supply)
UL Listed (industrial control equipment)
CSA Certified (process control equipment)
Hardware and Installation User Manual