Ti535 Eprom/Eeprom Socket And Jumper Pins - Siemens SIMATIC TI525 Hardware And Installation Manual

EPROM/EEPROM OPERATION
7. Insert the
EPROM/EEPROM with the socket screw. Refer to Figure 4-2.
8. Check the pins to make sure that they are all seated properly. Tighten
the socket by turning the screw clockwise.
9. Replace the PLC in its base and enable power. Refer to the
Troubleshooting Chapter if the EPROM/EEPROM fails to function
correctly.
Bezel edge
Figure 4-2 TI535 EPROM/EEPROM Socket and Jumper Pins
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
EPROM/EEPROM, aligning
4-7
the notch on the
EPROM/EEPROM
jumper pins
5
4
3
2
1
Hardware and Installation User Manual