Siemens SIPART PS2 Installation Instruction page 7

Mounting bracket kit

Hide thumbs Also See for SIPART PS2:

Table 4, Mounting Hole Locations (PS2 not shown for clarity)

4. While securing mounting plate assembly to actuator, adjustments to feedback pin depth may be

necessary so pin protrudes through the feedback arm a minimum 0.10" (2.5mm) to 0.15 (3.8mm)

max.

5. Once mounting plate assembly is secure to actuator, secure feedback pin to stem coupling by

tightening 3/8" hex nut against actuator stem coupling.

6. Verify all hardware is secure before proceeding with PS2 initialization.

15900-795