Bluetooth ® Operations - Panasonic SC-DM502 Operating Instructions Manual

Bluetooth
You can listen to the sound from the Bluetooth
device from this unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth
device for details.
Connecting via Bluetooth
Preparation
≥ Turn on the Bluetooth
place the device near this unit.
∫ Pairing with Bluetooth
1
Press [ ] to select "BLUETOOTH".
≥ If "PAIRING" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "PAIRING" and then
press [OK].
≥ Alternatively, press and hold [SELECT, s
on the unit.
3
Select "SC-DM502" from the Bluetooth
Bluetooth menu.
®
≥ The MAC address (alpha-numerical string that is unique
to each set) may be displayed before "SC-DM502" is
displayed.
≥ The name of the connected device is indicated on the
display for a few seconds.
4
Start playback on the Bluetooth
∫ Connecting a paired Bluetooth
1
Press [ ] to select "BLUETOOTH".
≥ "READY" is indicated on the display.
2
Select "SC-DM502" from the Bluetooth
Bluetooth menu.
®
≥ The name of the connected device is indicated on the
display for a few seconds.
3
Start playback on the Bluetooth
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this unit. If a 9th device
is paired, the device that has not been used the longest will
be replaced.
≥ This unit can only be connected to one device at a time.
≥ When "BLUETOOTH" is selected as the source, this unit will
automatically try and connect to the last connected
Bluetooth device. ("LINKING" is indicated on the display
®
during this process.) If the connection attempt fails, try to
establish a connection again.
8
TQBJ2215
operations
®
menu
®
feature of the device and
®
devices
®
®
device.
®
®
device.
®
Bluetooth
audio
®
You can change the transmission mode to prioritise
transmission quality or sound quality.
®
Preparation
≥ Press [
≥ If a Bluetooth
disconnect it.
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [3, 4] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
PAIRING]
≥ Select "MODE 1" if the sound is interrupted.
≥ When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
device's
select "MODE 1".
≥ The factory default is "MODE 2".
Bluetooth
If the sound input level from the Bluetooth
too low, change the input level setting.
Preparation
≥ Connect a Bluetooth
device
®
1
Press [PLAY MENU] repeatedly to select "INPUT
LEVEL".
2
device's
Press [3, 4] to select the level and then press
[OK].
"LEVEL 0" ,. "LEVEL i1" ,. "LEVEL i2"
^----------------------------------------------------J
≥ Select "LEVEL 0" if the sound is distorted.
≥ The factory default is "LEVEL 0".
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
2
Press [3, 4] to select "OK? YES" and then press
[OK].
≥ You can also disconnect the Bluetooth
and holding [SELECT, s
≥ The Bluetooth
audio source (e.g., "CD") is selected.
transmission mode
®
] to select "BLUETOOTH".
device is already connected,
®
input level
®
device.
®
device is connected:
®
device by pressing
®
PAIRING] on the unit.
device will be disconnected if a different
®
device is
®
device
®