Inserting Media; About Bluetooth - Panasonic SC-DM502 Operating Instructions Manual

Inserting media

Inserting a disc
1
Press [<] on this unit to open the disc tray.
2
Put in a disc with the label facing up.
3
Press [<] again to close the disc tray.
Connecting a USB device
Insert the USB device directly. Do not use any USB
extension cable.
≥ If you find difficulty in accessing this unit's
[SELECT, s PAIRING] when a USB device is connected,
use the remote control. Or, remove the USB device as
necessary.
≥ Please disconnect the USB device if you finish using.
≥ When moving this unit, be sure to remove all media and turn
this unit to standby mode.

About Bluetooth

Panasonic bears no responsibility for data and/or
information that is compromised during a
wireless transmission.
∫ Frequency band used
≥ This system uses the 2.4 GHz frequency band.
∫ Certification of this device
≥ This system conforms to frequency restrictions and
has received certification based on frequency laws.
Thus, a wireless permit is not necessary.
≥ The actions below are punishable by law in some
countries:
– Taking apart or modifying the system.
– Removing specification indications.
∫ Restrictions of use
≥ Wireless transmission and/or usage with all
Bluetooth equipped devices is not guaranteed.
®
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Depending on the specifications and settings of a
device, it can fail to connect or some operations can
be different.
≥ This system supports Bluetooth
But depending on the operating environment and/or
settings, this security is possibly not sufficient.
Transmit data wirelessly to this system with caution.
≥ This system cannot transmit data to a Bluetooth
device.
∫ Range of use
≥ Use this device at a maximum range of 10 m. The
range can decrease depending on the environment,
obstacles or interference.
∫ Interference from other devices
≥ This system may not function properly and troubles
such as noise and sound jumps may arise due to
radio wave interference if this system is located too
close to other Bluetooth
use the 2.4 GHz band.
≥ This system may not function properly if radio waves
from a nearby broadcasting station, etc. is too
strong.
∫ Intended usage
≥ This system is for normal, general use only.
≥ Do not use this system near an equipment or in an
environment that is sensitive to radio frequency
interference (example: airports, hospitals,
laboratories, etc).
®
security features.
®
devices or the devices that
®
®
7
TQBJ2215