Table of Contents
Advertisement
Bluetooth
operations
®
By using the Bluetooth
®
connection, you can listen to the
sound from the Bluetooth
audio device from this system
®
wirelessly.
• Refer to the operating instructions of the Bluetooth
device for details.
Connecting via Bluetooth
Preparation
• Turn on the Bluetooth
feature of the device and place
®
the device near this unit.
Pairing with Bluetooth
®
devices
1
Press [
] to select "BLUETOOTH".
If "PAIRING" is indicated on the display, go to step 3.
2
Press [PLAY MENU] to select "PAIRING" and
then press [OK].
Alternatively, press and hold
unit.
3
Select "SC-PMX80" from the Bluetooth
Bluetooth
menu.
®
The MAC address (e.g., 6C:5A:B5:B3:1D:0F) may
be displayed before "SC-PMX80" is displayed.
The name of the connected device is indicated on
the display for a few seconds.
4
Start playback on the Bluetooth
6
Connecting a paired Bluetooth
1
Press [
"READY" is indicated on the display.
2
®
Select "SC-PMX80" from the Bluetooth
Bluetooth
The name of the connected device is indicated on
menu
®
the display for a few seconds.
3
Start playback on the Bluetooth
Note:
• If prompted for the passkey, input "0000".
• You can register up to 8 devices with this unit. If a 9th
device is paired, the device that has not been used for the
longest will be replaced.
• This unit can only be connected to one device at a time.
• When "BLUETOOTH" is selected as the source, this unit
will automatically try and connect to the last connected
Bluetooth
during this process.) If the connection attempt fails, try to
establish a connection again.
[
-PAIRING] on the
Bluetooth
You can change the transmission mode to prioritize
device's
®
transmission quality or sound quality.
Preparation
• Press [
• If a Bluetooth
it.
1
device.
®
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [2, 1] to select the mode and then press
[OK].
MODE 1: Emphasis on connectivity
MODE 2: Emphasis on sound quality
Note:
• Select "MODE 1" if the sound is interrupted.
• When enjoying video contents with this function, the video
and audio output may not be synchronised. In this case,
select "MODE 1".
• The factory default is "MODE 2".
®
device
] to select "BLUETOOTH".
®
menu.
®
device.
®
device. ("LINKING" is indicated on the display
®
transmission mode
®
] to select "BLUETOOTH".
device is already connected, disconnect
®
Bluetooth
input level
®
If the sound input level from the Bluetooth
low, change the input level setting.
Preparation
device's
• Connect a Bluetooth
®
1
Press [PLAY MENU] repeatedly to select "INPUT
LEVEL".
2
Press [2, 1] to select the level and then press [OK].
"LEVEL 0"
,.
"LEVEL i1"
^----------------------------------------------J
Note:
• Select "LEVEL 0" if the sound is distorted.
• The factory default is "LEVEL 0".
Disconnecting a Bluetooth
1
While a Bluetooth
Press [PLAY MENU] repeatedly to select
"DISCONNECT?".
2
Press [2, 1] to select "OK? YES" and then press
[OK].
Note:
• You can also disconnect the Bluetooth
and holding [
-PAIRING] on the unit.
• The Bluetooth
device will be disconnected if a different
®
audio source (e.g., "CD") is selected.
Bluetooth
standby
®
When "SC-PMX80" is selected from a paired Bluetooth
device's Bluetooth
menu, this unit will turn on
®
automatically from standby mode and establish a
Bluetooth
®
connection.
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [2, 1] to select "ON" and then press [OK].
Note:
• To turn the function off, select "OFF" in step 2.
• The factory default is "OFF". If this function is set to "ON",
the standby power consumption will increase.
device is too
®
device.
,.
"LEVEL i2"
device
®
device is connected:
®
device by pressing
®
®
Advertisement
Table of Contents
