Epson EB-L735U User Manual page 224

Projector Indicator Status
Indicator and status Problem and solutions
Power: Flashing blue Projector is too hot.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Laser: Indicator status
• Clean or replace the air filter.
varies
• Make sure the environmental temperature is not too
Temp: Flashing orange
hot.
Filter: Indicator status
varies
Power: Off Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
Laser: Off
with dust or obstructed by nearby objects.
Temp: Lit orange
• Make sure the environmental temperature is not too
Filter: Off
hot.
• Clean or replace the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Installation menu.
• If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue Laser warning.
Status: Indicator status Turn the projector off, unplug it, and contact Epson for
varies help.
Laser: Flashing orange
Temp: Indicator status
varies
Filter: Indicator status
varies
Power: Off Laser has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Lit orange
Temp: Off
Filter: Off
Indicator and status Problem and solutions
Power: Off A fan or sensor has a problem.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Off
Temp: Flashing orange
Filter: Off
Power: Off Internal projector error.
Status: Flashing blue Turn the projector off, unplug it, and contact Epson for
help.
Laser: Flashing orange
Temp: Off
Filter: Off
Power: Indicator status It is time to clean the air filter.
varies
Status: Indicator status
varies
Laser: Indicator status
varies
Temp: Indicator status
varies
Filter: Flashing orange
Power: Flashing blue Low air flow through the air filter.
Status: Indicator status
• Make sure that the vents and air filter are not clogged
varies
with dust or obstructed by nearby objects.
Laser: Indicator status
• Clean or replace the air filter.
varies
• If the problem persists, unplug the projector and
Temp: Indicator status
contact Epson for help.
varies
Filter: Lit orange
Power: Off Low air flow through the projector.
Status: Flashing blue
• Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
Laser: Off
• Clean or replace the air filter.
Temp: Off
• If the problem persists, unplug the projector and
Filter: Lit orange
contact Epson for help.
224