Input Signal Settings - Signal I/O Menu - Epson EB-L735U User Manual

Input Signal Settings - Signal I/O Menu

Setting Options
A/V Output While Projecting
Always On
Audio Output Auto
Audio1
Audio2
HDMI Audio HDMI1 Audio
Output Output
HDMI2 Audio
Output
Monitor Out Port Monitor Out
Computer2
HDMI Link Device
Connections
HDMI Link
Audio Out Device
Description
Set to Always On to output audio and
images to external devices when the
projector does not project any images.
Setting is only displayed in the following
cases:
• Quick Startup is set to Off in the
projector's Operation menu.
• Auto Power On is set to Off in the
projector's Network menu.
s Network > Transmitter Settings >
Auto Power On
Sets the audio input port when projecting
from any sources other than the
HDBaseT, LAN, and Screen Mirroring.
Sets the audio input port when projecting
from HDMI ports.
Changes the input and output for the
Computer2/Monitor Out port. When
outputting images to an external
monitor, select Monitor Out. When
inputting image signals from a computer,
select Computer2.
Lists the devices connected to the HDMI
ports.
Setting is only displayed when HDMI
Link is set to On.
Set to On to enable the HDMI Link
features.
Selects whether to output audio from the
internal speakers or a connected
audio/video system.
Setting Options
Power On Link
Power Off Link
HDBaseT Control
Communications
Extron XTP
Reset Signal I/O —
Settings
184
Description
Controls what happens when you turn
on the projector or connected device.
• Bidirectional: automatically turns on
the connected device when you turn on
the projector, and vice versa.
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
• PJ -> Device: automatically turns on
the connected device when you turn on
the projector.
Controls whether connected devices are
turned off when you turn off the
projector.
Enables or disables communication from
the Ethernet and serial ports on the
HDBaseT transmitter or switcher;
turning on this setting disables the
projector's LAN and RS-232C ports.
Setting is only displayed when Extron
XTP is set to Off.
Set to On when you connect an Extron
XTP transmitter or switcher to the
HDBaseT ports. See the following
Extron Web site for more details on the
XTP system.
http://www.extron.com/
Resets all adjustment values on the
Signal I/O menu to their default settings.