Tiling Images Into One Image; Configuring Tiling - Epson EB-L735U User Manual

Using Multiple Projectors
• When you select [0/All] on the remote control, you can
operate all projectors regardless the Projector ID setting.
a
• When you set the Projector ID setting to Off, you can operate
the projector using the remote control whichever ID you select
on the remote control.
• The projector ID setting is saved in the remote control. Even if
the remote control batteries are removed to replace them and
so on, the saved ID setting is retained. However, if the batteries
are left out of the remote control for an extended period, the
ID returns to its default setting (0/All).
• When you use multiple remote controls at the same time, you
may not be able to operate projectors as intended due to
infrared interference.

Tiling Images into One Image

You can project the same image from up to 15 projectors to create one large
image using the Tiling feature.
Before tiling, make sure the displayed images from your projectors are
rectangular, correctly sized, and focused.
a
g g Related Links
• "Configuring Tiling" p.115

Configuring Tiling

You can configure tiling manually.
Available only when the HDMI Out Setting is set to Off
(EB‑L735U/EB‑L730U/EB‑L635SU/EB‑L630SU/EB‑L630U/EB‑L530U).
a
a
Turn on the projector.
b Press the [Menu] button, select the Multi-Projection menu, and press
[Enter].
115