Operating And Display Functions; Service Information; System Configuration: System - Vaillant VRT 350f Installation Instructions Manual

8 Operating and display functions

8 Operating and display functions
The path details given at the start of each function descrip-
tion indicate how you can access this function in the menu
structure.
The square brackets contain the level of detail to which the
function belongs.
You can use the left-hand selection button Menu and the
list entry Installer level to set the operating and display
functions.
8.1

Service information

8.1.1 Entering contact details
Menu →Installer level → Service information → Enter con-
tact data
– You can enter your contact details (company name and
phone number) in the controller.
– As soon as the date of the next service appointment is
reached, the operator can view these contact details in
the display of the controller.
8.1.2 Entering the service date
Menu → Installer level → Service information → Service
date
22
– In the controller, you can save a date (day, month, year)
for the next regular service.
When the date for the next service date is reached, the mes-
sage Service heater 1 is displayed in the basic display of
the controller.
If a service date is saved in the heater, the message Service
heater 1 appears on the heater when this date is reached.
The message is switched off if:
– the date is in the future.
– the initial date 01.01.2011 is set.
Note
To find out which service date to enter, refer to
the instructions for your heater unit.
8.2

System configuration: System

8.2.1 Reading the system status
Menu → Installer level → System configuration [System --
--] → Status
– This function allows you to read the status of the heating
system. If there is no fault, the message "OK" appears
here. If there is a fault, the status "Fault" is displayed.
If you press the right selector button the list of error
messages (→ Page 27) is displayed.
Installation instructions VRT 350f 0020131978_00