Using The Control; Operating And Display Functions - Vaillant sensoHOME VRT 380f Operating And Installation Instructions

2 Product description
2.10

-- Using the control

The control is installed in simple systems with direct heating circuits.
Note
After connecting an outdoor sensor, the control operates based on the weather.

2.11 Operating and display functions

Note
The functions described in this section are not available for all system configura-
tions.
The product has two adjustment and display levels.
The end user level contains information and setting options that you require as the end
user.
-- The installer level is reserved for the competent person. It is protected by a code.
Only competent persons may change any settings in the installer level.
To call up the menu, press
2.11.1 CONTROL menu item
MENU → CONTROL
→ Zone
→ Name of zone
→ Mode:
8
VRT 380f
eBUS
twice.
Changing the name Zone 1, which was set at the factory
→ Manual
Uninterrupted retention of the desired temperature
→ Time-contr.
Operating and installation instructions sensoHOME 0020298974_00
→ Desired temperature: °C
→ Weekly planner
→ Set-back temperature: °C