Reset Select Header, W2 - Motorola M68EM05P18 User Manual

Reset Select
Header, W2
M68EM05P18UM/D
MOTOROLA
Jumper header W2 controls the path of a target reset. The diagram here
shows the factory configuration: The fabricated jumper in the EVS
position enables the HC05EVS to control resets when you press the
user or master reset switch.
Alternatively, you can enable the target system to reset the H05EVS. To
do so:
• Reposition the M68EM05P18 W2 jumper to the TARGET position,
and
• Insert a fabricated jumper into the HC05EVS platform board
header J3.
• Provide RESET signal to connector J2 pin 2 (T_RST*)
HC05EVS Configuration and Operation
HC05EVS Configuration and Operation
Setting M68EM05P18 Jumper Headers and Switches
TARGET RESET
DRIVEN FROM
EVS
FABRICATED
JUMPER
TARGET
W2
35