A)
Automatic MultiScreen
Selecting this mode, the system shows two side-by-side equal-sized pictures:
graphics relating to system management will appear on the right, whereas motion
video will appear on the left.
Once connected, an XGA remote signal automatically changes the viewing mode
to BigLittleScreen mode; once in this mode, surfing inside menus will let back
again to the MultiScreen viewing mode.
To see a local XGA image select full-screen visualization, then you can switch to
BigLittleScreen mode by pressing the
Exiting from the FullScreen mode, the system immediately comes back to the
MultiScreen viewing mode.
a) Disconnected system.
b) Connected system (with 50" Pioneer plasma, you'll obtain two 27" images, 4:3 ).
.
C
key on the remote control.
53